{"title":"Case Kavach","description":"\u003cp\u003eCase Kavach makes sealed, impact-resistant hard cases for cameras, lenses, drones, audio kit and instruments — the kind of case that travels in an aircraft hold, rides in the back of a vehicle, or sits on a wet location floor without you thinking about it. Every case ships with foam and a snap-off foam cutter included in the price.\u003c\/p\u003e\n\n\u003ch2\u003eThe Vantage range\u003c\/h2\u003e\n\u003cp\u003eFifteen sizes, from a compact body-and-lens case up to a large wheeled trunk. All are moulded from impact-resistant polypropylene with a stainless steel hinge pin, twin latches, and a pressure equalisation valve that lets air balance during flight so the case still opens on arrival. Certifications vary by model — the exact list for each case is on its product page.\u003c\/p\u003e\n\n\u003ch2\u003eChoosing your foam\u003c\/h2\u003e\n\u003cp\u003eEvery case comes with solid foam sheets, convoluted lid foam and a cutter, so you cut a fit for your own kit. Pre-plucked cubed foam and fully CNC-machined custom foam are available to order — CNC gives the closest fit and the best protection, cut to a drawing of your exact gear.\u003c\/p\u003e\n\n\u003ch2\u003eGetting the size right\u003c\/h2\u003e\n\u003cp\u003eDon't guess, and don't reach for a tape measure. \u003ca href=\"\/pages\/case-finder\"\u003eUse the hard case size finder\u003c\/a\u003e — pick the gear you actually carry from a list and it works out the foam layout, checks it against all fifteen cases and draws the cut sheet to scale. If you would rather measure yourself, take your largest item with the lens attached and allow roughly 20 mm of foam on each side; usable interior space works out to about 65% of the stated internal volume once foam is in. Product pages list interior dimensions for every model.\u003c\/p\u003e\n\n\u003ch2\u003eBuy Case Kavach in India\u003c\/h2\u003e\n\u003cp\u003eFive-year warranty. GST invoice on every order, EMI available on eligible cards, shipping across India, prices in INR. See the full \u003ca href=\"\/collections\/waterproof-hard-cases\"\u003ewaterproof hard cases with foam\u003c\/a\u003e range.\u003c\/p\u003e","products":[{"product_id":"ck-v225-waterproof-camera-hard-case","title":"Waterproof Camera Hard Case 300 x 225 x 132mm | Case Kavach Vantage 225 (CK-V225)","description":"\u003cp\u003eA waterproof hard case with a 300 x 225 x 132 mm interior, sized for a mirrorless or DSLR body with two or three lenses, a compact drone kit, or a set of handheld instruments. The Case Kavach Vantage 225 seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 99 mm in the base and 33 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 8.9 litres and the empty case weighs 1.62 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e99 mm base and 33 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack or orange:\u003c\/strong\u003e High-visibility orange for field, rescue and site work where the case has to be spotted or not left behind.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V225\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 x 225 x 132 mm\u003cbr\u003e11.8 x 8.9 x 5.2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e336 x 300 x 148 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 99 mm | Cover 33 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.9 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.8 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.62 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack, Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 300 x 225 x 132 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 260 x 185 x 92 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 300 x 225 mm footprint with a 99 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera kit:\u003c\/strong\u003e One full-frame body plus two or three lenses, batteries and cards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact drone kit:\u003c\/strong\u003e One folding consumer drone, controller, spare batteries and charger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGimbal:\u003c\/strong\u003e One folding handheld gimbal with its base and cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest and measurement:\u003c\/strong\u003e Handheld multimeters, thermal cameras, probes and leads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio:\u003c\/strong\u003e Wireless microphone sets, a recorder and a small mixer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H — are field-equipment standards, not photography ones. The same 300 x 225 x 132 mm interior is used for air pistols and optics, drone payloads, survey and test instruments, and medical field kits. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 225 fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 132 mm in total, split as a 99 mm base and a 33 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 260 x 185 x 92 mm, or about 5.8 litres of the 8.9 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between black and orange?\u003c\/strong\u003e\u003cbr\u003eOnly the colour. Same shell, same seal, same certification. Orange is chosen for field, rescue and site work where the case has to be spotted quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 300 x 225 x 132 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48181976989854,"sku":"CK-V225-BLK-KIT","price":4700.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48181977022622,"sku":"CK-V225-BLK-PLK","price":4700.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48181977055390,"sku":"CK-V225-BLK-CNC","price":6300.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48181977088158,"sku":"CK-V225-BLK-CSE","price":3500.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Cut-to-Fit Foam + Cutter","offer_id":48181977120926,"sku":"CK-V225-ORG-KIT","price":4700.0,"currency_code":"INR","in_stock":true},{"title":"Orange \/ Pluck Foam (Pre-Cubed)","offer_id":48181977153694,"sku":"CK-V225-ORG-PLK","price":4700.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Custom CNC-Cut Foam","offer_id":48181977186462,"sku":"CK-V225-ORG-CNC","price":6300.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Case Only (No Foam)","offer_id":48181977219230,"sku":"CK-V225-ORG-CSE","price":3500.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/waterproof-camera-hard-case-black-open-ck-v225-1.webp?v=1786795971"},{"product_id":"ck-v180-waterproof-action-camera-hard-case","title":"Waterproof Action Camera Hard Case 235 x 180 x 106mm | Case Kavach Vantage 180 (CK-V180)","description":"\u003cp\u003eA waterproof hard case with a 235 x 180 x 106 mm interior, sized for an action camera with mounts, a compact drone, or a set of radios and handheld instruments. The Case Kavach Vantage 180 seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 81 mm in the base and 25 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 4.4 litres and the empty case weighs 0.84 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e81 mm base and 25 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack or orange:\u003c\/strong\u003e High-visibility orange for field, rescue and site work where the case has to be spotted or not left behind.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V180\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e235 x 180 x 106 mm\u003cbr\u003e9.3 x 7.1 x 4.2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e258 x 243 x 117 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 81 mm | Cover 25 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.4 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.9 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.84 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack, Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 235 x 180 x 106 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 195 x 140 x 66 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 235 x 180 mm footprint with an 81 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAction camera kit:\u003c\/strong\u003e Two action cameras with housings, mounts, batteries and a charger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact drone:\u003c\/strong\u003e One sub-250 g folding drone with controller and three batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens or body:\u003c\/strong\u003e A single mirrorless body, or one lens up to 100 mm long.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRadios and comms:\u003c\/strong\u003e Two handhelds with spare batteries, antennas and a programming cable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstruments:\u003c\/strong\u003e A multimeter, clamp meter or thermal camera with its probes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H — are field-equipment standards, not photography ones. The same 235 x 180 x 106 mm interior is used for handheld radios, night-vision monoculars, pistol optics, medical field kits and calibration standards. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 180 fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 106 mm in total, split as an 81 mm base and a 25 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 195 x 140 x 66 mm, or about 2.9 litres of the 4.4 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between black and orange?\u003c\/strong\u003e\u003cbr\u003eOnly the colour. Same shell, same seal, same certification. Orange is chosen for field, rescue and site work where the case has to be spotted quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 235 x 180 x 106 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48181997371550,"sku":"CK-V180-BLK-KIT","price":3500.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48181997404318,"sku":"CK-V180-BLK-PLK","price":3500.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48181997437086,"sku":"CK-V180-BLK-CNC","price":4700.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48181997469854,"sku":"CK-V180-BLK-CSE","price":2600.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Cut-to-Fit Foam + Cutter","offer_id":48181997502622,"sku":"CK-V180-ORG-KIT","price":3500.0,"currency_code":"INR","in_stock":true},{"title":"Orange \/ Pluck Foam (Pre-Cubed)","offer_id":48181997535390,"sku":"CK-V180-ORG-PLK","price":3500.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Custom CNC-Cut Foam","offer_id":48181997568158,"sku":"CK-V180-ORG-CNC","price":4700.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Case Only (No Foam)","offer_id":48181997600926,"sku":"CK-V180-ORG-CSE","price":2600.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/waterproof-camera-hard-case-black-open-ck-v225-1.webp?v=1786795971"},{"product_id":"ck-v195l-waterproof-microphone-hard-case","title":"Waterproof Microphone Hard Case 316 x 195 x 81mm | Case Kavach Vantage 195L (CK-V195L)","description":"\u003cp\u003eA waterproof hard case with a 316 x 195 x 81 mm interior, sized for shotgun microphones, wireless kits and other long, shallow items that a deep case wastes space on. The Case Kavach Vantage 195L seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 65 mm in the base and 16 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 4.9 litres and the empty case weighs 0.58 kg. Working from -10°C to 80°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -10°C to 80°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65 mm base and 16 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V195L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e316 x 195 x 81 mm\u003cbr\u003e12.4 x 7.7 x 3.2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e350 x 230 x 86 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 65 mm | Cover 16 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.9 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.2 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.58 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-10°C to 80°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 316 x 195 x 81 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 276 x 155 x 41 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 316 x 195 mm footprint with a 65 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShotgun microphone:\u003c\/strong\u003e One shotgun mic up to 300 mm with blimp mount, cable and windshield.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless audio:\u003c\/strong\u003e A two-channel wireless set with transmitters, receivers, lavaliers and antennas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCables and adapters:\u003c\/strong\u003e Coiled XLR runs, adapters, and a small field recorder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTripod accessories:\u003c\/strong\u003e Quick-release plates, ball heads and a levelling base.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocuments and drives:\u003c\/strong\u003e A 13-inch laptop sleeve, drives and paperwork.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe IP67 seal is a field-equipment rating, not a photography one. The same 316 x 195 x 81 mm interior is used for survey rods, spotting scope accessories, medical instrument trays and cable assemblies. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 195L fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 81 mm in total, split as a 65 mm base and a 16 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 276 x 155 x 41 mm, or about 3.2 litres of the 4.9 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 316 x 195 x 81 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182008742046,"sku":"CK-V195L-BLK-KIT","price":2600.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182008774814,"sku":"CK-V195L-BLK-PLK","price":2600.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182008807582,"sku":"CK-V195L-BLK-CNC","price":3500.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182008840350,"sku":"CK-V195L-BLK-CSE","price":1950.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofMicrophoneHardCase316x195x81mm_CaseKavachVantage195L_CK-V195L_-1.jpg?v=1787559528"},{"product_id":"ck-v270s-waterproof-drone-hard-case","title":"Waterproof Drone Hard Case 380 x 270 x 115mm | Case Kavach Vantage 270S (CK-V270S)","description":"\u003cp\u003eA waterproof hard case with a 380 x 270 x 115 mm interior, sized for a folding drone with its controller and batteries laid flat, or a body with several lenses side by side. The Case Kavach Vantage 270S seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 79 mm in the base and 36 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 11.7 litres and the empty case weighs 1.86 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e79 mm base and 36 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V270S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e380 x 270 x 115 mm\u003cbr\u003e15.0 x 10.6 x 4.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e414 x 345 x 129 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 79 mm | Cover 36 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e11.7 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e7.6 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.86 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 380 x 270 x 115 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 340 x 230 x 75 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 380 x 270 mm footprint with a 79 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrone kit:\u003c\/strong\u003e One folding prosumer drone, controller, four batteries, charging hub and ND filters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera kit:\u003c\/strong\u003e A body with three lenses laid flat, plus a flash and batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaptop and field kit:\u003c\/strong\u003e A 15-inch laptop with charger, drives and a card reader.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio kit:\u003c\/strong\u003e A field recorder, two shotgun mics and a wireless set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstruments:\u003c\/strong\u003e A laid-out set of meters, probes, cables and calibration gear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H — are field-equipment standards, not photography ones. The same 380 x 270 x 115 mm interior is used for reconnaissance drone payloads, ruggedised tablets, sighting systems and portable diagnostic units. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 270S fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 115 mm in total, split as a 79 mm base and a 36 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 340 x 230 x 75 mm, or about 7.6 litres of the 11.7 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 380 x 270 x 115 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182018801822,"sku":"CK-V270S-BLK-KIT","price":5500.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182018834590,"sku":"CK-V270S-BLK-PLK","price":5500.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182018867358,"sku":"CK-V270S-BLK-CNC","price":7400.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182018900126,"sku":"CK-V270S-BLK-CSE","price":4100.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofDroneHardCase380x270x115mm_CaseKavachVantage270S_CK-V270S_-2.jpg?v=1787559826"},{"product_id":"ck-v270d-waterproof-camera-kit-hard-case","title":"Waterproof Camera Kit Hard Case 380 x 270 x 160mm | Case Kavach Vantage 270D (CK-V270D)","description":"\u003cp\u003eA waterproof hard case with a 380 x 270 x 160 mm interior, sized for a working two-body camera kit, or a drone with the payload and spares packed above it. The Case Kavach Vantage 270D seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 124 mm in the base and 36 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 16.4 litres and the empty case weighs 2.2 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e124 mm base and 36 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H, UN4H2:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V270D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e380 x 270 x 160 mm\u003cbr\u003e15.0 x 10.6 x 6.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e414 x 345 x 174 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 124 mm | Cover 36 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e16.4 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10.7 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H, UN4H2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 380 x 270 x 160 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 340 x 230 x 120 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 380 x 270 mm footprint with a 124 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-body kit:\u003c\/strong\u003e Two mirrorless bodies with four lenses, batteries, chargers and cards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrone and payload:\u003c\/strong\u003e A folding drone with controller, six batteries and a gimbal payload above.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Two compact LED panels with stands folded, softboxes and batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio bag:\u003c\/strong\u003e A recorder, mixer, wireless kit and boom pole sections.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTools and instruments:\u003c\/strong\u003e A deep tool tray with meters and consumables above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H, UN4H2 — are field-equipment standards, not photography ones. The same 380 x 270 x 160 mm interior is used for UAV payloads, night-vision and thermal sighting units, field laboratory kits and UN4H2 dangerous-goods packing. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 270D fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 160 mm in total, split as a 124 mm base and a 36 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 340 x 230 x 120 mm, or about 10.7 litres of the 16.4 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H, UN4H2. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 380 x 270 x 160 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182019752094,"sku":"CK-V270D-BLK-KIT","price":7999.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182019784862,"sku":"CK-V270D-BLK-PLK","price":7999.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182019817630,"sku":"CK-V270D-BLK-CNC","price":10800.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182019850398,"sku":"CK-V270D-BLK-CSE","price":6000.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofCameraKitHardCase380x270x160mm_CaseKavachVantage270D_CK-V270D_-2.jpg?v=1787560135"},{"product_id":"ck-v335s-waterproof-laptop-hard-case","title":"Waterproof Laptop Hard Case 465 x 335 x 125mm | Case Kavach Vantage 335S (CK-V335S)","description":"\u003cp\u003eA waterproof hard case with a 465 x 335 x 125 mm interior, sized for a large laptop with its accessories, or a wide flat layout of lenses and controllers. The Case Kavach Vantage 335S seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 85 mm in the base and 40 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 19.4 litres and the empty case weighs 2.6 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e85 mm base and 40 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V335S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e465 x 335 x 125 mm\u003cbr\u003e18.3 x 13.2 x 4.9 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e502 x 415 x 141 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 85 mm | Cover 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.4 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12.6 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 465 x 335 x 125 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 425 x 295 x 85 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 465 x 335 mm footprint with an 85 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLaptop and edit kit:\u003c\/strong\u003e A 17-inch laptop, charger, drives, card readers and a colour probe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLens layout:\u003c\/strong\u003e Four to five lenses laid flat with padding between each.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrone:\u003c\/strong\u003e One folding drone with controller, batteries and filters, laid flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl surfaces:\u003c\/strong\u003e A small mixing surface, MIDI controller or DMX board.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDocuments:\u003c\/strong\u003e Presentation material, tablets and demonstration samples.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H — are field-equipment standards, not photography ones. The same 465 x 335 x 125 mm interior is used for ruggedised laptops, field terminals, portable ultrasound units and technical documentation. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 335S fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 125 mm in total, split as an 85 mm base and a 40 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 425 x 295 x 85 mm, or about 12.6 litres of the 19.4 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 465 x 335 x 125 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182020407454,"sku":"CK-V335S-BLK-KIT","price":7500.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182020440222,"sku":"CK-V335S-BLK-PLK","price":7500.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182020472990,"sku":"CK-V335S-BLK-CNC","price":10100.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182020505758,"sku":"CK-V335S-BLK-CSE","price":5600.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofLaptopHardCase465x335x125mm_CaseKavachVantage335S_CK-V335S_-4.jpg?v=1787560373"},{"product_id":"ck-v290s-waterproof-gimbal-hard-case","title":"Waterproof Gimbal Hard Case 426 x 290 x 159mm | Case Kavach Vantage 290S (CK-V290S)","description":"\u003cp\u003eA waterproof hard case with a 426 x 290 x 159 mm interior, sized for a three-axis gimbal with the arms folded, plus the balance plates, batteries and cables it needs. The Case Kavach Vantage 290S seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 114 mm in the base and 45 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 19.6 litres and the empty case weighs 2.76 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e114 mm base and 45 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack or orange:\u003c\/strong\u003e High-visibility orange for field, rescue and site work where the case has to be spotted or not left behind.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V290S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e426 x 290 x 159 mm\u003cbr\u003e16.8 x 11.4 x 6.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e464 x 366 x 176 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 114 mm | Cover 45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.6 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e12.7 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.76 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack, Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 426 x 290 x 159 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 386 x 250 x 119 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 426 x 290 mm footprint with a 114 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGimbal kit:\u003c\/strong\u003e One three-axis gimbal folded, with base, batteries, cables and balance plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera and lenses:\u003c\/strong\u003e A body with a lens fitted upright, plus two more lenses beside it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMonitor kit:\u003c\/strong\u003e A field monitor in its cage, hood, arms, batteries and cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless video:\u003c\/strong\u003e A transmitter and receiver pair, antennas and mounting arms.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrone:\u003c\/strong\u003e One folding drone with controller, batteries and charging hub.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H — are field-equipment standards, not photography ones. The same 426 x 290 x 159 mm interior is used for stabilised sighting mounts, portable spectrometers, surveillance camera assemblies and field medical kits. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 290S fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 159 mm in total, split as a 114 mm base and a 45 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 386 x 250 x 119 mm, or about 12.7 litres of the 19.6 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between black and orange?\u003c\/strong\u003e\u003cbr\u003eOnly the colour. Same shell, same seal, same certification. Orange is chosen for field, rescue and site work where the case has to be spotted quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 426 x 290 x 159 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182021226654,"sku":"CK-V290S-BLK-KIT","price":6300.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182021259422,"sku":"CK-V290S-BLK-PLK","price":6300.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182021292190,"sku":"CK-V290S-BLK-CNC","price":8500.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182021324958,"sku":"CK-V290S-BLK-CSE","price":4700.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Cut-to-Fit Foam + Cutter","offer_id":48182021357726,"sku":"CK-V290S-ORG-KIT","price":6300.0,"currency_code":"INR","in_stock":true},{"title":"Orange \/ Pluck Foam (Pre-Cubed)","offer_id":48182021390494,"sku":"CK-V290S-ORG-PLK","price":6300.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Custom CNC-Cut Foam","offer_id":48182021423262,"sku":"CK-V290S-ORG-CNC","price":8500.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Case Only (No Foam)","offer_id":48182021456030,"sku":"CK-V290S-ORG-CSE","price":4700.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofGimbalHardCase426x290x159mm_CaseKavachVantage290S_CK-V290S_-1.jpg?v=1787560630"},{"product_id":"ck-v230-waterproof-lens-hard-case","title":"Waterproof Lens Hard Case 400 x 230 x 260mm | Case Kavach Vantage 230 (CK-V230)","description":"\u003cp\u003eA waterproof hard case with a 400 x 230 x 260 mm interior, sized for a telephoto lens standing upright, or tall items a shallow case cannot take. The Case Kavach Vantage 230 seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 212.5 mm in the base and 47.5 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 22.0 litres and the empty case weighs 2.44 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e212.5 mm base and 47.5 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V230\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e400 x 230 x 260 mm\u003cbr\u003e15.7 x 9.1 x 10.2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e456 x 290 x 318 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 212.5 mm | Cover 47.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22.0 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14.3 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.44 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 400 x 230 x 260 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 360 x 190 x 220 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 400 x 230 mm footprint with a 212.5 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTelephoto lens:\u003c\/strong\u003e One 70-200 mm or 100-400 mm zoom standing upright with the hood reversed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody with lens fitted:\u003c\/strong\u003e A DSLR with a mid-zoom attached, stored ready to shoot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash and modifiers:\u003c\/strong\u003e Three speedlights upright with stands, triggers and batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottles and cylinders:\u003c\/strong\u003e Tall instruments, sample bottles or gas detectors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBinoculars and optics:\u003c\/strong\u003e A pair of full-size binoculars or a compact spotting scope.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H — are field-equipment standards, not photography ones. The same 400 x 230 x 260 mm interior is used for spotting scopes, rifle optics, gas detection instruments, sample cylinders and tall laboratory apparatus. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 230 fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 260 mm in total, split as a 212.5 mm base and a 47.5 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 360 x 190 x 220 mm, or about 14.3 litres of the 22.0 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 400 x 230 x 260 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182021718174,"sku":"CK-V230-BLK-KIT","price":6500.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182021750942,"sku":"CK-V230-BLK-PLK","price":6500.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182021783710,"sku":"CK-V230-BLK-CNC","price":8800.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182021816478,"sku":"CK-V230-BLK-CSE","price":4900.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofLensHardCase400x230x260mm_CaseKavachVantage230_CK-V230_-1.jpg?v=1787560957"},{"product_id":"ck-v290d-waterproof-cinema-camera-hard-case","title":"Waterproof Cinema Camera Hard Case 520 x 290 x 200mm | Case Kavach Vantage 290D (CK-V290D)","description":"\u003cp\u003eA waterproof hard case with a 520 x 290 x 200 mm interior, sized for a cinema camera built up with a lens, matte box and monitor still attached. The Case Kavach Vantage 290D seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 155 mm in the base and 45 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 30.16 litres and the empty case weighs 3.6 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e155 mm base and 45 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V290D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e520 x 290 x 200 mm\u003cbr\u003e20.5 x 11.4 x 7.9 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e574 x 361 x 225 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 155 mm | Cover 45 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30.16 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19.6 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 520 x 290 x 200 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 480 x 250 x 160 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 520 x 290 mm footprint with a 155 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCinema camera:\u003c\/strong\u003e One compact cinema body with lens, matte box, top handle and monitor fitted.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-body kit:\u003c\/strong\u003e Two mirrorless bodies with five lenses and full accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Three LED panels with stands, softboxes, batteries and controllers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio:\u003c\/strong\u003e A full location sound bag, boom, wireless kits and spares.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstruments:\u003c\/strong\u003e Deep-stacked test equipment with a tray of consumables above.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H — are field-equipment standards, not photography ones. The same 520 x 290 x 200 mm interior is used for surveillance and thermal imaging assemblies, field spectrometry, portable radar units and defence optics. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 290D fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 200 mm in total, split as a 155 mm base and a 45 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 480 x 250 x 160 mm, or about 19.6 litres of the 30.16 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 520 x 290 x 200 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182022078622,"sku":"CK-V290D-BLK-KIT","price":9100.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182022111390,"sku":"CK-V290D-BLK-PLK","price":9100.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182022144158,"sku":"CK-V290D-BLK-CNC","price":12300.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182022176926,"sku":"CK-V290D-BLK-CSE","price":6800.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofCinemaCameraHardCase520x290x200mm_CaseKavachVantage290D_CK-V290D_-2.jpg?v=1787561145"},{"product_id":"ck-v350-waterproof-photography-kit-hard-case","title":"Waterproof Photography Kit Hard Case 500 x 350 x 194mm | Case Kavach Vantage 350 (CK-V350)","description":"\u003cp\u003eA waterproof hard case with a 500 x 350 x 194 mm interior, sized for a full working photography kit — two bodies, a spread of lenses, flash and support. The Case Kavach Vantage 350 seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 136 mm in the base and 58 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 33.9 litres and the empty case weighs 3.9 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e136 mm base and 58 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack or orange:\u003c\/strong\u003e High-visibility orange for field, rescue and site work where the case has to be spotted or not left behind.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 x 350 x 194 mm\u003cbr\u003e19.7 x 13.8 x 7.6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e555 x 428 x 211 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 136 mm | Cover 58 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e33.9 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22.0 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack, Orange\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 500 x 350 x 194 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 460 x 310 x 154 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 500 x 350 mm footprint with a 136 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull camera kit:\u003c\/strong\u003e Two bodies, five lenses, two speedlights, triggers, batteries and cards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWedding or event kit:\u003c\/strong\u003e Everything for a day's shooting, with the lid layer for chargers and cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrone kit:\u003c\/strong\u003e One prosumer drone, controller, six batteries, hub, filters and landing pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting kit:\u003c\/strong\u003e Two to three LED panels with modifiers and battery plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRental package:\u003c\/strong\u003e A checked-out kit list that has to survive courier handling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H — are field-equipment standards, not photography ones. The same 500 x 350 x 194 mm interior is used for field survey packages, portable diagnostic systems, weapon optics sets and instrument calibration kits. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 350 fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 194 mm in total, split as a 136 mm base and a 58 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 460 x 310 x 154 mm, or about 22.0 litres of the 33.9 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between black and orange?\u003c\/strong\u003e\u003cbr\u003eOnly the colour. Same shell, same seal, same certification. Orange is chosen for field, rescue and site work where the case has to be spotted quickly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 500 x 350 x 194 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182030467230,"sku":"CK-V350-BLK-KIT","price":9400.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182030499998,"sku":"CK-V350-BLK-PLK","price":9400.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182030532766,"sku":"CK-V350-BLK-CNC","price":12700.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182030565534,"sku":"CK-V350-BLK-CSE","price":7050.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Cut-to-Fit Foam + Cutter","offer_id":48182030598302,"sku":"CK-V350-ORG-KIT","price":9400.0,"currency_code":"INR","in_stock":true},{"title":"Orange \/ Pluck Foam (Pre-Cubed)","offer_id":48182030631070,"sku":"CK-V350-ORG-PLK","price":9400.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Custom CNC-Cut Foam","offer_id":48182030663838,"sku":"CK-V350-ORG-CNC","price":12700.0,"currency_code":"INR","in_stock":false},{"title":"Orange \/ Case Only (No Foam)","offer_id":48182030696606,"sku":"CK-V350-ORG-CSE","price":7050.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofPhotographyKitHardCase500x350x194mm_CaseKavachVantage350_CK-V350_-2.jpg?v=1787561400"},{"product_id":"ck-v335d-tr-waterproof-lighting-hard-case","title":"Waterproof Lighting Hard Case 465 x 335 x 220mm | Case Kavach Vantage 335D-TR (CK-V335D-TR)","description":"\u003cp\u003eA waterproof hard case with a 465 x 335 x 220 mm interior, sized for a lighting kit with the stands folded, rolled to location on its own wheels. The Case Kavach Vantage 335D-TR seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use. This size runs on wheels with a telescopic pull-out handle, so the weight moves on the ground rather than in your hand.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 180 mm in the base and 40 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 34.2 litres and the empty case weighs 4.42 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e180 mm base and 40 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheeled transport:\u003c\/strong\u003e Wheels and a telescopic pull-out handle so a 4.42 kg empty case, loaded, still moves easily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V335D-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e465 x 335 x 220 mm\u003cbr\u003e18.3 x 13.2 x 8.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e502 x 422 x 267 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 180 mm | Cover 40 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e34.2 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e22.2 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4.42 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes, with telescopic pull-out handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 465 x 335 x 220 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 425 x 295 x 180 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 465 x 335 mm footprint with a 180 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED lighting kit:\u003c\/strong\u003e Three panels with softboxes, barn doors, battery plates and controllers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash kit:\u003c\/strong\u003e Two studio strobes with reflectors, triggers and spare tubes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera and grip:\u003c\/strong\u003e A body with lenses plus clamps, arms and small grip hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable trunk:\u003c\/strong\u003e Mains runs, distribution boxes, dimmers and spare lamps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrade show kit:\u003c\/strong\u003e Display hardware, samples and demonstration equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G — are field-equipment standards, not photography ones. The same 465 x 335 x 220 mm interior is used for portable floodlighting, field generators and distribution gear, deployable comms masts and shelter equipment. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 335D-TR fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 220 mm in total, split as a 180 mm base and a 40 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 425 x 295 x 180 mm, or about 22.2 litres of the 34.2 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have wheels?\u003c\/strong\u003e\u003cbr\u003eYes. Wheels plus a telescopic pull-out handle. The empty case weighs 4.42 kg, so wheels matter once it is loaded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 465 x 335 x 220 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182051831966,"sku":"CK-V335D-TR-BLK-KIT","price":11990.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182051864734,"sku":"CK-V335D-TR-BLK-PLK","price":11990.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182051897502,"sku":"CK-V335D-TR-BLK-CNC","price":16200.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182051930270,"sku":"CK-V335D-TR-BLK-CSE","price":9000.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofLightingHardCase465x335x220mm_CaseKavachVantage335D-TR_CK-V335D-TR_-2.jpg?v=1787561619"},{"product_id":"ck-v405l-waterproof-production-kit-hard-case","title":"Waterproof Production Kit Hard Case 538 x 405 x 245mm | Case Kavach Vantage 405L (CK-V405L)","description":"\u003cp\u003eA waterproof hard case with a 538 x 405 x 245 mm interior, sized for a deep production kit where the gear stands tall and nothing has to be broken down. The Case Kavach Vantage 405L seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 195 mm in the base and 50 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 53.3 litres and the empty case weighs 5.3 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e195 mm base and 50 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V405L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e538 x 405 x 245 mm\u003cbr\u003e21.2 x 15.9 x 9.6 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e594 x 473 x 270 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 195 mm | Cover 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e53.3 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e34.6 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 538 x 405 x 245 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 498 x 365 x 205 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 538 x 405 mm footprint with a 195 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduction kit:\u003c\/strong\u003e A cinema body built up, three lenses upright, monitor, matte box and follow focus.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-camera:\u003c\/strong\u003e Three mirrorless bodies with lenses fitted, standing in their own cells.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting:\u003c\/strong\u003e Four LED panels upright with modifiers, stands folded alongside.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge drone:\u003c\/strong\u003e One folding professional drone with arms folded, controller and eight batteries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquipment pool:\u003c\/strong\u003e A shared kit that different crews check in and out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H — are field-equipment standards, not photography ones. The same 538 x 405 x 245 mm interior is used for field workshops, deployable server and comms racks, portable imaging systems and armoury transport. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 405L fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 245 mm in total, split as a 195 mm base and a 50 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 498 x 365 x 205 mm, or about 34.6 litres of the 53.3 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 538 x 405 x 245 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182073426078,"sku":"CK-V405L-BLK-KIT","price":15800.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182073458846,"sku":"CK-V405L-BLK-PLK","price":15800.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182073491614,"sku":"CK-V405L-BLK-CNC","price":21300.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182073524382,"sku":"CK-V405L-BLK-CSE","price":11850.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofProductionKitHardCase538x405x245mm_CaseKavachVantage405L_CK-V405L_-2.jpg?v=1787561993"},{"product_id":"ck-v405-tr-waterproof-video-kit-hard-case","title":"Waterproof Video Kit Hard Case 538 x 405 x 190mm | Case Kavach Vantage 405-TR (CK-V405-TR)","description":"\u003cp\u003eA waterproof hard case with a 538 x 405 x 190 mm interior, sized for a wheeled video kit — camera, lenses, monitor, audio and power in one case that pulls behind you. The Case Kavach Vantage 405-TR seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use. This size runs on wheels with a telescopic pull-out handle, so the weight moves on the ground rather than in your hand.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 140 mm in the base and 50 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 41.4 litres and the empty case weighs 6.4 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e140 mm base and 50 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheeled transport:\u003c\/strong\u003e Wheels and a telescopic pull-out handle so a 6.4 kg empty case, loaded, still moves easily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G, UN4H2:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V405-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e538 x 405 x 190 mm\u003cbr\u003e21.2 x 15.9 x 7.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e604 x 473 x 225 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 140 mm | Cover 50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e41.4 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e26.9 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e6.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G, UN4H2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes, with telescopic pull-out handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 538 x 405 x 190 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 498 x 365 x 150 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 538 x 405 mm footprint with a 140 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo kit:\u003c\/strong\u003e One camera with three lenses, monitor, wireless video, batteries and charger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-camera setup:\u003c\/strong\u003e Two mirrorless bodies with lenses, cages, monitors and cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting and grip:\u003c\/strong\u003e Two panels, clamps, arms, sandbag-free stands and a cable set.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio package:\u003c\/strong\u003e Recorder, mixer, four wireless channels, boom and windshields.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstrument transport:\u003c\/strong\u003e A layered set of meters, probes and calibration standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G, UN4H2 — are field-equipment standards, not photography ones. The same 538 x 405 x 190 mm interior is used for deployable communications kits, field test benches, UN4H2 dangerous-goods transport and defence optics packages. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 405-TR fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 190 mm in total, split as a 140 mm base and a 50 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 498 x 365 x 150 mm, or about 26.9 litres of the 41.4 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have wheels?\u003c\/strong\u003e\u003cbr\u003eYes. Wheels plus a telescopic pull-out handle. The empty case weighs 6.4 kg, so wheels matter once it is loaded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G, UN4H2. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 538 x 405 x 190 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182085517470,"sku":"CK-V405-TR-BLK-KIT","price":21500.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182085550238,"sku":"CK-V405-TR-BLK-PLK","price":21500.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182085583006,"sku":"CK-V405-TR-BLK-CNC","price":29000.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182085615774,"sku":"CK-V405-TR-BLK-CSE","price":16100.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofVideoKitHardCase538x405x190mm_CaseKavachVantage405-TR_CK-V405-TR_-1.jpg?v=1787562175"},{"product_id":"ck-v460l-tr-waterproof-cinema-kit-hard-case","title":"Waterproof Cinema Kit Hard Case 620 x 460 x 340mm | Case Kavach Vantage 460L-TR (CK-V460L-TR)","description":"\u003cp\u003eA waterproof hard case with a 620 x 460 x 340 mm interior, sized for a full cinema package on wheels — bodies, a lens set, monitoring and power in one move. The Case Kavach Vantage 460L-TR seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use. This size runs on wheels with a telescopic pull-out handle, so the weight moves on the ground rather than in your hand.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 280 mm in the base and 60 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 96.0 litres and the empty case weighs 9.4 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e280 mm base and 60 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheeled transport:\u003c\/strong\u003e Wheels and a telescopic pull-out handle so a 9.4 kg empty case, loaded, still moves easily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V460L-TR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e620 x 460 x 340 mm\u003cbr\u003e24.4 x 18.1 x 13.4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e687 x 528 x 376 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 280 mm | Cover 60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e96.0 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e62.4 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e9.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes, with telescopic pull-out handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 620 x 460 x 340 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 580 x 420 x 300 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 620 x 460 mm footprint with a 280 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCinema package:\u003c\/strong\u003e A cinema body with a five-lens prime set, matte box, follow focus and monitor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMulti-camera shoot:\u003c\/strong\u003e Three bodies with lenses, cages, monitors, batteries and chargers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroadcast kit:\u003c\/strong\u003e A shoulder camera with viewfinder, lens, batteries, charger and audio.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge drone:\u003c\/strong\u003e One professional folding drone with payload, controller and battery bank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRental transport:\u003c\/strong\u003e A full package moving between locations by road and air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G — are field-equipment standards, not photography ones. The same 620 x 460 x 340 mm interior is used for deployable command posts, field medical and surgical sets, portable radar and sensor packages. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 460L-TR fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 340 mm in total, split as a 280 mm base and a 60 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 580 x 420 x 300 mm, or about 62.4 litres of the 96.0 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have wheels?\u003c\/strong\u003e\u003cbr\u003eYes. Wheels plus a telescopic pull-out handle. The empty case weighs 9.4 kg, so wheels matter once it is loaded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, STANAG 4280, DEF-STAN 81-41, MIL-STD-810G. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 620 x 460 x 340 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182099017886,"sku":"CK-V460L-TR-BLK-KIT","price":21800.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182099050654,"sku":"CK-V460L-TR-BLK-PLK","price":21800.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182099083422,"sku":"CK-V460L-TR-BLK-CNC","price":29400.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182099116190,"sku":"CK-V460L-TR-BLK-CSE","price":16350.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofCinemaKitHardCase620x460x340mm_CaseKavachVantage460L-TR_CK-V460L-TR_-2.jpg?v=1787562432"},{"product_id":"ck-v600-waterproof-cargo-hard-case","title":"Waterproof Cargo Hard Case 820 x 600 x 450mm | Case Kavach Vantage 600 (CK-V600)","description":"\u003cp\u003eA waterproof hard case with an 820 x 600 x 450 mm interior, sized for bulk equipment, full kit pools and long items — the largest case in the range, on wheels. The Case Kavach Vantage 600 seals against water and dust, takes the knocks of road, rail and air transport, and ships with foam and a cutter so you can shape the inside to your own kit on day one.\u003c\/p\u003e\n\u003cp\u003eThe shell is moulded in polypropylene with thick walls and corrosion-resistant nylon hardware. A continuous seal in the lid gives an IP67 rating against water and dust. An automatic pressure equalisation valve balances internal pressure on flights and altitude changes without letting moisture in. Two-stage snap closures open by hand but stay shut under shock, and padlock eyelets take a travel lock. A full-length hinge keeps the body square over years of use. This size runs on wheels with a moulded carrying handle, so the weight moves on the ground rather than in your hand.\u003c\/p\u003e\n\u003cp\u003eInterior depth splits 380 mm in the base and 70 mm in the cover, so taller items stand in the base while the lid layer takes cables, chargers, filters and paperwork. Total volume is 221.4 litres and the empty case weighs 14.78 kg. Working from -30°C to 90°C.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealed protection:\u003c\/strong\u003e A continuous lid seal keeps out water, dust and humidity in the field and in transit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpact-resistant shell:\u003c\/strong\u003e Thick polypropylene walls absorb shock and stay stable from -30°C to 90°C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic pressure equalisation valve:\u003c\/strong\u003e Balances internal pressure on flights and altitude changes without admitting moisture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-stage snap closures:\u003c\/strong\u003e Open easily by hand, hold under drops and vibration, and take a padlock through the eyelets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e380 mm base and 70 mm cover:\u003c\/strong\u003e A depth split that suits gear in the base and flat accessories in the lid, rather than one open cavity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoam and cutter included:\u003c\/strong\u003e Solid foam sheets, convoluted foam fitted in the lid, and a snap-off cutter, in the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheeled transport:\u003c\/strong\u003e Wheels and a moulded handle so a 14.78 kg empty case, loaded, still moves easily.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertified to IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H:\u003c\/strong\u003e Test documentation is available on request for tender and procurement submissions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCK-V600\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e820 x 600 x 450 mm\u003cbr\u003e32.3 x 23.6 x 17.7 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eOuter dimensions (W x H x D)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e880 x 660 x 483 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInner depth\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBase 380 mm | Cover 70 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVolume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e221.4 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsable volume with foam (approx.)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e143.9 L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight (empty case)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e14.78 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePolypropylene (PP), Nylon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-30°C to 90°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProtection rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67 waterproof and dustproof\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCertifications\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWheels\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes, with carrying handle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColours\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIn the box\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCase, solid foam sheets, convoluted lid foam, foam cutter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCountry of origin\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHSN code\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e42021250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5 years\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eCase, Foam and Cutter — choosing your foam\u003c\/h3\u003e\n\u003cp\u003eEvery case ships with the cut-to-fit set, so it is usable the day it arrives.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-Fit Foam + Cutter (included):\u003c\/strong\u003e Solid foam sheets, a convoluted sheet already fitted in the lid, and a snap-off cutter. Lay your gear on the top sheet, mark the outline, cut. A body and two lenses takes about twenty minutes. Cut a fresh sheet whenever your kit changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePluck Foam (Pre-Cubed):\u003c\/strong\u003e The same foam, pre-scored into small cubes. Pull cubes out by hand to open a pocket — no knife, no dust. Quicker than cutting, but the walls come out stepped rather than smooth, so smaller items sit a little looser.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCustom CNC-Cut Foam — the best fit available:\u003c\/strong\u003e Send us your equipment list and the foam is machine-cut to the exact outline, with a finger-lift notch at every item. Nothing shifts in transit and nothing rubs. It is the only option that properly holds an awkward shape — a matte box, a gimbal with the arm still on, a monitor in its cage — and it is what rental houses and broadcast crews order. Priced per case and per layout: contact us with your kit list for a quotation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Only (No Foam):\u003c\/strong\u003e For fitting your own dividers, a rack tray, or a padded insert carried over from another case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFoam is cut to the 820 x 600 x 450 mm interior. Allow about 20 mm of foam on each side once cut, which leaves roughly 780 x 560 x 410 mm of usable space.\u003c\/p\u003e\n\u003ch3\u003eWhat Fits\u003c\/h3\u003e\n\u003cp\u003eThe 820 x 600 mm footprint with a 380 mm base takes the following, allowing 20 to 25 mm of foam around each item.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull kit pool:\u003c\/strong\u003e Several camera packages, or an entire department's gear in one move.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong items:\u003c\/strong\u003e Tripods, sliders, jib sections, light stands and boom poles up to 820 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighting package:\u003c\/strong\u003e Six or more panels with modifiers, stands, cabling and distribution.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLarge drone:\u003c\/strong\u003e A professional drone with arms extended, plus payloads and battery bank.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFreight:\u003c\/strong\u003e Consolidated shipment of mixed equipment on a single pallet position.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot sure your equipment will fit? Send us the packed dimensions on WhatsApp and we will confirm before you order.\u003c\/p\u003e\n\u003ch3\u003eBeyond the camera bag\u003c\/h3\u003e\n\u003cp\u003eThe standards behind this case — IP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H — are field-equipment standards, not photography ones. The same 820 x 600 x 450 mm interior is used for unit-level equipment transport, deployable workshops, armoury and ordnance handling, and disaster-response stores. Foam is cut to whatever you are carrying.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the Vantage 600 fully waterproof?\u003c\/strong\u003e\u003cbr\u003eYes. It carries an IP67 rating, which means fully dust-tight and protected against temporary immersion in water.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat comes in the box?\u003c\/strong\u003e\u003cbr\u003eThe case, solid foam sheets, a convoluted foam sheet already fitted in the lid, and a snap-off cutter. Nothing else to buy to get started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow deep is the case, and how is that depth divided?\u003c\/strong\u003e\u003cbr\u003eInterior depth is 450 mm in total, split as a 380 mm base and a 70 mm cover. Taller items stand in the base while the lid layer holds cables, chargers and flat accessories.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much space do I actually get after foam?\u003c\/strong\u003e\u003cbr\u003eAllow about 20 mm of foam on each side. That leaves roughly 780 x 560 x 410 mm, or about 143.9 litres of the 221.4 litre total.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich foam should I choose?\u003c\/strong\u003e\u003cbr\u003eCut-to-fit ships with the case and suits most people. Pluck foam is faster but less precise. Custom CNC-cut foam gives the best fit and is the right choice for a fixed kit that travels constantly — send us your equipment list for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I re-cut the foam later if my kit changes?\u003c\/strong\u003e\u003cbr\u003eYes. The sheets are solid, so you cut a new layout in a fresh sheet. Replacement foam sets are available for every size in the range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it have wheels?\u003c\/strong\u003e\u003cbr\u003eYes. Wheels plus a moulded carrying handle. The empty case weighs 14.78 kg, so wheels matter once it is loaded.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I check this in as airline baggage?\u003c\/strong\u003e\u003cbr\u003eYes. The pressure equalisation valve balances internal air pressure during flight without letting in dust or water, and the padlock eyelets accept a travel lock.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs IP67 enough for monsoon transport?\u003c\/strong\u003e\u003cbr\u003eYes. IP67 means fully dust-tight and protected against immersion in one metre of water for thirty minutes, well beyond what rain or a wet loading bay will do.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat certifications does it hold, and can I get the documents?\u003c\/strong\u003e\u003cbr\u003eIP67, ATA 300, STANAG 4280, DEF-STAN 81-41, MIL-STD-810H. Test documentation is available on request for tender and procurement submissions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo you supply institutions and government departments?\u003c\/strong\u003e\u003cbr\u003eYes. We handle volume, institutional and government orders, including custom foam cutting to a supplied equipment list. Contact us for a quotation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the warranty?\u003c\/strong\u003e\u003cbr\u003eFive years against manufacturing defects in the shell, seal, hinge and latches.\u003c\/p\u003e\n\u003ch3\u003eOrdering\u003c\/h3\u003e\n\u003cp\u003eInstitutional, government and volume orders are welcome. Contact us for a quotation and for custom foam cutting to your equipment list.\u003c\/p\u003e\n\u003cp\u003eInterior dimensions are 820 x 600 x 450 mm. If you are unsure whether your equipment will fit, send us the dimensions and we will confirm before you order.\u003c\/p\u003e","brand":"Case Kavach","offers":[{"title":"Black \/ Cut-to-Fit Foam + Cutter","offer_id":48182125854878,"sku":"CK-V600-BLK-KIT","price":47000.0,"currency_code":"INR","in_stock":true},{"title":"Black \/ Pluck Foam (Pre-Cubed)","offer_id":48182125887646,"sku":"CK-V600-BLK-PLK","price":47000.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Custom CNC-Cut Foam","offer_id":48182125920414,"sku":"CK-V600-BLK-CNC","price":63500.0,"currency_code":"INR","in_stock":false},{"title":"Black \/ Case Only (No Foam)","offer_id":48182125953182,"sku":"CK-V600-BLK-CSE","price":35250.0,"currency_code":"INR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/3840\/0670\/files\/WaterproofCargoHardCase820x600x450mm_CaseKavachVantage600_CK-V600_-2.jpg?v=1787562783"}],"url":"https:\/\/shutterbuzz.in\/collections\/case-kavach.oembed?page=2","provider":"ShutterBuzz","version":"1.0","type":"link"}